Monitron

Large Coverage Difficult Areas Remote Roads Varying Terrain

Unattended Ground Sensors

¨ LCT-XX, The LCT is a sophisticated processor and transmitter housed in a compact rugged case which facilitates storage, transportation, and concealment. This unit is ideal for short or long term deployment. A single unit receives, processes, and transmits information generated by contact closure/open, seismic, infrared, or magnetic sensor(s) either individually or in various combinations of deployment, giving the system maximum flexibility. The LCT-XX utilizes four types of sensor boards: Directional/Seismic (DS), Dual Directional (DD), Dual Seismic (SS) and Contact Closure/Open (CC).

¨ PIR, Passive Infrared Detectors produce a signal when sensing a quick change in incidence infrared radiation within its field of view. The unit is utilized for remote detection of vehicles, people, and objects. Easily concealed, it is ideal for perimeter protection, border observation, tactical surveillance systems, and airport security. Several models are available with various detection ranges and capabilities.

¨ SPS-20 , A buried geophone detects seismic activity at the detector location and generates an electrical signal that is analyzed by the processor to determine if a specified type of intrusion has occurred. A single seismic detector (SPS-20) can be deployed to monitor a small area or trail, or detectors can be combined in a string (SPS-21) to monitor large open areas or perimeters.

¨ MS-10, A buried or concealed magnetometer detects disturbances in the earth’s magnetic field caused by movement of ferrous or magnetically sensitive material moving through the sensor range. Stationary objects do not affect the detector. The MS-10 is a dual channel sensor allowing it to determine direction of travel.

¨ RD106-B, The RD106-B Base Monitor has a set of two (2) receivers and two (2) displays, allowing for different frequencies to be monitored or redundant sensing of the same frequency. Each channel has two individual RS-232-serial ports, allowing the selected channel information to be entered into a database and/or printed independently of each other.

¨ RD105-UB1, The RD105-B Base Monitor, single receiver eight (8) channel, is designed as a portable base monitor, ideally used in guardhouse settings when the agent (guard) needs to move between different guardhouses. The RD105-BU1 utilizes a built in keypad and LCD display. The monitor senses alarms then translates the encoded message to be displayed on the LCD display. The alarms are also sent to an RS-232 Serial port. It can also be used as a repeater.

¨ RD115-M, The RD115-M Mobile Monitor is designed and constructed for vehicle use. Modular construction provides system flexibility and cost-effective field service. The monitor and display are housed in separate enclosures and attach via a six (6) foot cable, allowing the user to place the display in the vehicle for easy viewing while driving

¨ RD201-P, The portable monitor is designed and constructed for field use. It can be powered either by an external 12Vdc-power source or a rechargeable 12Vdc battery. The monitors can operate for eight (8) hours on the battery before recharging is needed. Along with the ability to receive incoming alarms, the portable monitor also can function as a transmitter, transmitting alarms for system tests. The portable monitor is extremely useful in field deployment of transmitters and repeaters

¨ RD401,

The RD401 50 Watt Repeater is a rugged, weather tight RF relay station specially designed for use in fixed installations in remote areas. It functions efficiently by using a single synthesized transponder to monitor encoded alarm signals. When a valid alarm is received, a second synthesized transponder and RF amplifier are powered up to retransmit the alarm. The RD401 50 Watt Repeater can receive on one frequency and retransmit on another. The signals may originate from sensors as well as other repeaters and are sent on to the next receiving unit (a monitor or another repeater). The RD401 50 Watt Repeater can be programmed receive and retransmit all incoming alarms, monitor twenty (20) specific block addresses, or monitor ten (10) unique addresses. This enables the unit to repeat only primary sensor alarms.

Qual-Tron

QTI INTRUSION DETECTION SYSTEMS QTI Intrusion Detection Systems are sold exclusively to U.S. and Foreign Military, Government Agencies and Law Enforcement Agencies. They are used for a variety of applications to include perimeter security, conduct surveillance, detect movement, protect resources, and provide site security. Each system includes sensors, transmitters, receivers and relays. They provide instantaneous digitally encoded messages that are displayed on hand held or base station receivers. Data logging systems enhance these systems by providing sensor logs, mapping systems and visual confirmation of sensor activity. See the following product pages for more details. MIDS - Mini Intrusion Detection System is a single channel fixed frequency system capable of monitoring up to 32 sensors. It has a built in sensor fault alarm if the sensor is disconnected from the transmitter. This is the most economical system and consists of the following equipment: MXMT Transmitter, MPDM Hand Held Receiver, and MRLY Relay. Note: Frequency is customer specified and factory installed (selected from 138-174 MHz).   MIDS-II - Mini Intrusion Detection System (Modified) is a single channel fixed frequency system capable of monitoring up to 999 sensors. It provides additional data messages which include sensor fault alarm, directional information, transmitter test and low battery message. An "On/Test" switch is included on the transmitter. This system falls in the mid price range. MIDS-II Equipment includes: MXMT-II Transmitter, MPDM-II Hand Held Receiver, and MRLY Relay. Note: Frequency is customer specified and factory installed (selected from 138-174 MHz).   EMIDS - Enhanced Mini Intrusion Detection System is a multi-Channel Synthesized System capable of monitoring up to 999 sensors. It is available in three frequency ranges; low band 138-153 MHz with 600 channels, mid band 154-162 MHz with 1600 channels and high band 162-174 MHz with 1920 channels. This system also provides additional data messages which include sensor fault alarm, sensor directional information, transmitter tamper alarm, and transmitter test and low battery messages. It also provides state of health messages from hourly up to 24 hour intervals. This system includes the following equipment: MMCT Transmitter, MMCR Hand Held Receiver, and MSRY Relay.   Mini Break Wire Sensor Model:BWSH P/N:13D0367 The Break Wire Sensor (BWSH) is activated when the wire is broken. The sensor contains 250 meters of # 44 gauge parallel bonded wire which provides circuit continuity and incorporates a built in self test. This sensor must be manually reset after each activation. This sensor is an excellent choice for monitoring doors, gates or objects that must be moved. The IR Break Beam Sensor (MBBD) is an active infrared system. It consists of two elements, an emitter and detector. The emitter transmits a pulsed infrared beam that is aligned with the detector head and is activated if an object interrupts the beam. This sensor is effective for both animate and inanimate objects.   Passive Infrared Sensor Model:PIRH P/N:13D0723 The Passive Infrared Sensor (PIRH) detects the passage of an object by the change in IR heat. The sensor has a built in alignment feature and an adjustable gain setting switch. Two versions are available (normal and Long Range).   Mini Magnetic Sensor Model:MAGH P/N:13D0456 The Magnetic Sensor (MAGH) detects the passage of any magnetic object entering or leaving the magnetic field surrounding the sensor. This sensor is effective for detecting armed personnel and vehicles. There are three magnetic sensors with different sensitivity ratings and detection ranges (Normal, - 20 dB, - 40 dB).   Mini Seismic Sensor Model:MSSH P/N:13D0163-1 The Seismic Sensor (MSSH) detects the passage of people and vehicles from vibrations they cause in the ground. The vibrations are picked up by a geophone which activates an alarm. Ranges vary depending on ground and soil density. There are two versions of the Seismic Sensor (MSSH sensor only and MSID which includes the sensor and single channel transmitter). The Hydrophone Sensor (MDHP) detects activity in waterways which generate noises above the ambient level. The sensor includes an electronic housing and two hydrophone sensors which are deployed in the water. It includes a built in multi-channel transmitter and utilizes AGC circuitry and manual gain settings. There are three versions/models.  Directional And Or Switch Model: DAOR P/N: The Directional And Or Switch (DAOR) can be used with the MIDS-II and EMIDS Intrusion Detection Systems to provide directional information. The DAOR has two inputs for sensors and an output to a transmitter. When a target passes by both sensors, the direction is recorded by the DAOR and sent as a data message as part of the alarm. There are 16 modes of operation with various gate times.

www.qual-tron.com 

 

http://mcbordersecurityinc.com/pdf/Coyote_Repeater.pdf

http://mcbordersecurityinc.com/pdf/Coyote_Server.pdf

Coyote UGS Sensor Node www.iwtwireless.com

0. Sensing modes: 3 axis Seismic, Acoustic, PIR, Magnetic (configurable sensing suite)
0. Embedded GPS for self location
0. Over The Air Programmable (OTAP)
0. Any UGS can act as repeater
0. Mesh network: IWT multiband (300, 400, 900 MHz) ad hoc mesh
0. Operating Life: 2 yrs at 250 detections per day
0. Batteries: Standard military BA5390 (1 or 2 packs / node) or commercial Lithium option
0. Power scavenging: Interfaces for external solar or other power source
0. Detection, Classification: Asymmetric threats, sensor fusion performed locally in UGS minimizing network traffic
0. Direct bury package
0. Security: 128 bit AES, anti
* ‐tamper, anti‐spoof, anti‐jam, remote re‐key, zeroize

The Next Generation Unattended Ground Sensor

The Coyote UGS is a multi

‐sensor, battery operated Unattended Ground Sensor (UGS) with embedded IWT mesh radio technology. It is designed for extremely long operating life and has many features for remote management and diagnostics. Employing the latest detection and classification algorithms, the Coyote UGS fuses the sensor data in the UGS reducing network traffic and maximizing battery life. IWT has changed the UGS playing field.

Benefits

0. Easy to deploy and manage
0. Cost effective system solution
0. Reliably scales from small focused targets to nationwide network
0. Minimal field time required to maintain network
0. Resistant to security attacks
0. >95% detection and classification rate
0. Size: 5.9" x 6.7" x 9.4"
0. Weight 6.5lbs including batteries
0.        Rx sensitivity: ‐88dBm
0. Waterproof to 1m depth
0. Range between nodes: 100-300m ground to ground,  up to 3km LOS
0. Temperature ‐40 to +85 C

   * Operating life for UGS is subjective. IWT has based its expected operating life on 250 detections per day. Many competitors only predict operating life on 100 detections per day.

   Specifications

   Software Configured Frequency and Amplification

   The Coyote UGS™Sensor Node allows frequency and power levels to be completely controlled by software. The board has internal amplifiers for transmit and receive capable of 20dB small signal gain.

   Coyote UGS Information

   The Coyote UGS™is part of IWTs turnkey Coyote Unattended Sensor System and which incorporates our world leading wireless mesh communications solution. For more information on the Coyote system and wireless mesh, contact IWT at M C Border Security Inc.